SDS Poly-Cut™

SDS Poly-Cut

All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Tullco, Inc. products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from Tullco, Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

SECTION 1: IDENTIFICATION

TULLCO, INC.                                         PRODUCT NAME:  POLY-CUT ™

37A OSAGE DRIVE                                 CHEMICAL FAMILY: AMINE POLYMER

GREENVILLE, SC 29605                         FORMULA: PROPRIETARY

EMERGENCY PHONE: 864 299-8884     

TOLL FREE (800) 673-6498

====================================================================-

SECTION 2: HAZARD(S) IDENTIFICATION

Contains no ingredient now known

to be hazardous as defined by

OSHA 29 CFR 1910.1000 (subpart Z),

and OSHA 29 CFR 1900.1200

Carcinogenic: contains no known

or suspected carcinogens

=====================================================================

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

Major Ingredients:

Water, Oils – Vegetable and hydrocarbon (See Section 6), Triethanolamine 99%, Hexylene Glycol

The polymer in this product is held by OSHA as a trade secret.

=====================================================================

SECTION 4: FIRST-AID MEASURES

First Aid Procedures:

INGESTION:  induce vomiting, contact physician.

EYES: flush with water. cease upon flushing with water.

INHALATION: no known effects.

EYE CONTACT: slight burning sensation to the eyes which should Cease upon flushing with water.

SKIN CONTACT: normally skin contact

Relevant Symptoms on Exposure: is not a problem, but is for those with soap Sensitivity, dry skin.

=====================================================================

SECTION 5: FIRE FIGHTING MEASURES

Flash Point: none

Method Used: open cup

Extinguishing Media: water, CO2, foam

Special Fire Fighting Procedures: none

Unusual Fire and Explosion Hazard: none

Upper Flammable Limits: none

=====================================================================

SECTION 6: ACCIDENTAL RELEASE MEASURES

Spills: absorb spills and place in solid waste container

Waste Disposal: dispose in accordance with local, state and federal laws.

=====================================================================

SECTION 7: HANDLING AND STORAGE

Store in cool dry area away from oxidizers. Product will freeze.

Storage Life: one year. Do not store in direct sunlight or direct heater vent.

=====================================================================

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

Ventilation Requirements: General.

Respirator: None required.

Toxic Level: mild irritant sensitive skin

TLV by OSHA or ACGIH: Not yet established

Eye Equipment: goggles or glasses

Hands: Gloves  recommended for sensitive skin

=====================================================================

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

Boiling Point: 190F

PH 8.1 + or – 0.2 Rate: negligible

Specific Gravity (H20=1): .95

Solubility in Water: Complete

Appearance and Odor: Viscous, blue liquid, with aromatic odor

Vapor Pressure: negligible

Vapor Density: negligible

Evaporation rate:  negligible

Volatile:  negligible

=====================================================================

SECTION 10: STABILITY AND REACTIVITY

Hazardous Polymerization: N/A

Incompatible Materials: Oxidizers

Hazardous Decomposition Products: thermal decomposition releases carbon monoxide.

=====================================================================

SECTION 11: TOXICOLOGICAL INFORMATION

Likely routes of exposure: skin and eyes.- 

No known long term effects:

No known acute toxicity estimates.

Slight burning possible on skin or in eyes.

No known carcinogens

=====================================================================

SECTION 12: ECOLOGICAL INFORMATION

No present requirements.

=====================================================================

SECTION 13: DISPOSAL CONSIDERATIONS

The Biocide used in this product for use in is approved by the EPA for cutting fluids (no phenol).

Product Contains: 16,866 mg/1 oils and greases

Product Oxygen Demand (BOD): 75,200 mg/1

Used product may contain heavy metals.  Dispose in accordance with local, state and federal laws.

=====================================================================

SECTION 14: TRANSPORT INFORMATION

Ships as Class 55

=====================================================================

SECTION 15: REGULATORY INFORMATION

No present requirements

=====================================================================

SECTION 16: OTHER INFORMATION

Revised 11/8/2017

=====================================================================

ATTENTION : These Safety Data Sheets are provided for general information only.

This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE INFORMATION HEREIN PROVIDED. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information nor do we offer warranty against patent infringement.