SDS POLY-FORM ™

5192022-sds-poly-form
SECTION 1: IDENTIFICATION

PRODUCT NAME: POLY-FORM™
CHEMICAL FAMILY: AMINE
POLYMER FORMULA: PROPRIETARY

TULLCO, INC.
37A OSAGE DRIVE
GREENVILLE, SC 29605

EMERGENCY PHONE: 864 299-8884
ALTERNATE PHONE: 812-572-6556

SECTION 2:
HAZARD(S) IDENTIFICATION Contains no ingredient now known to be hazardous as defined by OSHA 29 CFR 1910.1000 (subpart Z), and OSHA 29 CFR 1900.1200.
Carcinogenic: contains no known or suspected carcinogens
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Major Ingredients: Water, Oils – Vegetable and hydrocarbon (See Section 6), Triethanolamine 99%, Hexylene Glycol
The polymer in this product is held by OSHA as a trade secret.
SECTION 4: FIRST-AID MEASURES First Aid Procedures:
INGESTION: induce vomiting, contact physician.
EYES: flush with water, cease upon flushing with water.
INHALATION: no known effects.
EYE CONTACT: slight burning sensation to the eyes which should cease upon flushing with water.
SKIN CONTACT: normally skin contact Relevant Symptoms on Exposure: is not a problem, but is for those with soap Sensitivity, dry skin.
SECTION 5: FIRE FIGHTING MEASURES
Flash Point: none Method
Used: open cup
Extinguishing Media: water, CO2, foam
Special Fire Fighting Procedures: none
Unusual Fire and Explosion Hazard: none
Upper Flammable Limits: none
SECTION 6: ACCIDENTAL RELEASE MEASURES
Spills: absorb spills and place in solid waste container Waste
Disposal: dispose in accordance with local, state, and federal laws.
SECTION 7: HANDLING AND STORAGE
Store in cool dry area away from oxidizers. Product will freeze.
Storage Life: Expectancy one year.
Do not store in direct sunlight or direct heater vent.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Ventilation Requirements: General.
Respirator: None required.
Toxic Level: mild irritant sensitive skin TLV by OSHA or ACGIH: Not yet established
Eye Equipment: goggles or glasses
Hands: Gloves recommended for sensitive skin
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: 190F
PH 8.1 + or – 0.2
Rate: negligible Specific Gravity (H20=1): .95
Solubility in Water: Complete
Appearance and Odor: Viscous, blue liquid, with aromatic odor
Vapor Pressure: negligible
Vapor Density: negligible
Evaporation rate: negligible
Volatile: negligible
SECTION 10: STABILITY AND REACTIVITY
Hazardous Polymerization: N/A Incompatible Materials: Oxidizers
Hazardous Decomposition Products: thermal decomposition releases carbon
SECTION 11: TOXICOLOGICAL INFORMATION
Likely routes of exposure: skin and eyes. – No known
Long-term effects: No known acute toxicity estimates.
Slight burning possible on skin or in eyes. No known carcinogens
SECTION 12: ECOLOGICAL INFORMATION
No present requirements.
SECTION 13: DISPOSAL CONSIDERATIONS
The Biocide used in this product for use is approved by the EPA for cutting fluids (no phenol). Product Contains: 16,866 mg/1 oils and greases Product Oxygen Demand (BOD): 75,200 mg/1
Used product may contain heavy metals.
Dispose in accordance with local, state, and federal laws.
SECTION 14: TRANSPORT INFORMATION
Ships as Class 70
SECTION 15: REGULATORY INFORMATION
No present requirements
SECTION 16: OTHER INFORMATION
Revised 5/19/2022
ATTENTION: These Safety Data Sheets are provided for general information only. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability, or completeness. NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING
THE INFORMATION HEREIN PROVIDED. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information, nor do we offer warranty against patent infringement.