5192022-sds-premier-poly-cut

SAFETY DATA SHEET™
PREMIER POLY-CUT

All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing Tullco, Inc. products is allowed provided that: (1) the information is copied in full
with no changes unless prior written agreement is obtained from Tullco, Inc., and (2) neither the
copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.

SECTION 1======================================================================

IDENTIFICATION
TULLCO, INC. PRODUCT NAME: PREMIER POLY-CUT™
37A OSAGE DRIVE CHEMICAL FAMILY: AMINE POLYMER
GREENVILLE, SC 29605 FORMULA: PROPRIETARY
EMERGENCY PHONE: 864-299-8884
ALTERNATIVE PHONE:  812-572-6556

SECTION 2=======================================================================

HAZARD(S) IDENTIFICATION
Contains no ingredient now known to be hazardous as defined by OSHA 29 CFR 1910.1000
(subpart Z), and OSHA 29 CFR 1900.1200.
Carcinogenic: contains no known or suspected carcinogens

SECTION 3:=======================================================================

COMPOSITION/INFORMATION ON INGREDIENTS
Major Ingredients:
Water, Oils – Vegetable and hydrocarbon (See Section 6), Triethanolamine 99%, Hexylene Glycol
The polymer in this product is held by OSHA as a trade secret.

SECTION 4:=======================================================================

FIRST-AID MEASURES
First Aid Procedures:
INGESTION: induce vomiting, contact physician. EYES: flush with water, cease upon flushing with
water.
INHALATION: no known effects.
EYE CONTACT: slight burning sensation to the eyes which should cease upon flushing with water. SKIN
CONTACT: normally skin contact
Relevant Symptoms on Exposure: is not a problem, but is for those with soap Sensitivity, dry skin.

SECTION 5:=======================================================================

FIRE FIGHTING
MEASURES
Flash Point: none Method Used: open cup
Extinguishing Media: water, CO2, foam Special Fire Fighting Procedures: none
Unusual Fire and Explosion Hazard: none
Flammable Limits: none

SECTION 6:===================================================================

ACCIDENTAL RELEASE MEASURES
Spills: absorb spills and place in solid waste container
Waste Disposal: dispose in accordance with local, state, and federal laws.

SECTION 7: ===================================================================

HANDLING AND STORAGE
Store in cool dry area away from oxidizers. Product will freeze.
Storage Life: Expected one year. Do not store in direct sunlight or direct heater vent.

SECTION 8: ===================================================================

EXPOSURE CONTROLS/PERSONAL PROTECTION
Ventilation Requirements: General. Respirator: None required.
Toxic Level: mild irritant sensitive skin
TLV by OSHA or ACGIH: Not yet established Eye Equipment: goggles or glasses
Hands: Gloves recommended for sensitive skin

SECTION 9: ===================================================================

PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: 190F
PH 8.1 + or – 0.2 Rate: negligible
Specific Gravity (H20=1): .95
Solubility in Water: Complete
Appearance and Odor: Viscous, blue liquid, with aromatic odor
Vapor Pressure: negligible
Vapor Density: negligible Evaporation rate: negligible Volatile: negligible

SECTION 10: ===================================================================

STABILITY AND REACTIVITY
Hazardous Polymerization: N/A Incompatible Materials: Oxidizers
Hazardous Decomposition Products: thermal decomposition releases carbon

SECTION11:====================================================================

TOXICOLOGICAL INFORMATION
Likely routes of exposure: skin and eyes. – No known long-term effects: No known acute toxicity
estimates.
Slight burning possible on skin or in eyes. No known carcinogens

SECTION 12:====================================================================

ECOLOGICAL INFORMATION
No present requirements.

SECTION 13: ====================================================================

DISPOSAL CONSIDERATIONS
The Biocide used in this product for use is approved by the EPA for cutting fluids (no phenol).
Product Contains: 16,866 mg/1 oils and greases Product
Oxygen Demand (BOD): 75,200 mg/1
Used product may contain heavy metals. Dispose in accordance with local, state, and federal laws.

SECTION 14:====================================================================

TRANSPORT INFORMATION
Ships as Class 70

SECTION 15: ====================================================================

REGULATORY INFORMATION
No present requirements

SECTION 16: ====================================================================

OTHER INFORMATION Revised 5/19/2022

=============================================================================

ATTENTION: These Safety Data Sheets are provided for general information only.

This information relates to the specific material designated and may not be valid for such material
used in combination with any other materials or in any process. Such information is to the best of
our knowledge and belief, accurate and reliable as of the date compiled.
However, no representation, warranty or guarantee is made as to its accuracy, reliability, or
completeness. NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING

THE INFORMATION HEREIN PROVIDED. It is the user’s responsibility to satisfy himself as to the
suitability and completeness of such information for his own particular use. We do not accept
liability for any loss or damage that ay occur from the use of this information, nor do we
offer warranty against patent infringement.