We Use a Plant Based Oil. Our products contains no ingredient now known to be hazardous as defined by OSHA 29 CFR 1910.1000 (subpart Z), and OSHA 29 CFR 1900.1200.  We are Non-Carcinogenic:  Premier Poly-Cut™ contains no known or suspected carcinogens.  

We Dissipate Heat Better, no one else has our EP Polymer™.  We improve the life of your drill bits, blades and tools.  Premier Poly-Cut™ is capable of being used in virtually every application within the machining industry.

For more information about our product and how to use it see the attached pdf files and links.    

CAPABILITIES STATEMENT

premier product sheet       poly-cut product sheet

PRODUCT PAMPHLET FRONT SIDE                                    PRODUCT PAMPHLET BACK SIDE, 

TIPS

NOW OUR FORMULA IS EVEN BETTER WITH

IMPROVED DEFOAMING ACTION!

Improved Defoaming Action Press Release

Premier Poly-Cut™, Poly-Cut™ and Poly-Form™ do not contain wax, active or inactive sulfur, phenol, fluorocarbons, boron, phosphorus, mercury or any heavy metals, Teflon ®, or silicone.  Contains 3ppm chloride and less than 1ppm fluoride.  Therefore, they can be used on finished parts for atomic reactors, space craft, aircraft and jet or rocket engines.

Premier Poly-Cut™

Premier Poly-Cut™ has antibacterial and anti-fungal properties that are built-in to inhibit the growth of bacteria and fungus that may affect this product.  Together, they insure the longest sump life possible (six months or longer in most cases.)  Premier Poly-Cut™ works remarkably well in machining steel, aluminum, copper alloys, zinc, tool steel, Inconel ® and other nickel and chrome base alloys.  It dissipates heat better than any other product on the market and, with the polymer additives, will eliminate welding or chip build-up on your inserts and end-mills giving an exceptional finish.  When machining aluminum, Premier Poly-Cut™ will provide a superior finish much like kerosene and oil but without the hazards.  Our products are also highly recommended for grinding carbide and gummy tool steels using a vitrified bonded wheel, without loading.  Premier Poly-Cut™ will not stain or corrode ferrous metals, nonferrous metals, plastics, ceramics, rubber or titanium.  This product is clean to work with and will not smoke, stain skin or clothing or cause dermatitis.

Available in:  1-Gallon Jugs, 5-Gallon Pails and 55-Gallon Drums

Application:	Cutting Metals Over 30 Rc	Cutting Most Metals and Plastics	Grinding
Dilution:	15:1	20:1	30:1
Refractometer Reading:	2.5	2.0	1.5

Poly-Cut™

Premier Poly-Cut™ and Poly-Cut™are virtually the same products with the difference being that Premier Poly-Cut™contains much stronger antibacterial and anti-fungal additives.  We recommend Poly-Cut™ for use in band saws or other similar flood-type machining where the coolant/lubricant is not being recaptured.  Poly-Cut™ works well in machining steel, aluminum, copper alloys, zinc, tool steel, Inconel ® and other nickel and chrome base alloys.  It dissipates heat better than any other product on the market and, with the polymer additives, will eliminate welding or chip build-up on your inserts and end-mills giving an exceptional finish.  When machining aluminum, Poly-Cut™ will provide a superior finish much like kerosene and oil but without the hazards.  Our products are also highly recommended for grinding carbide and gummy tool steels using a vitrified bonded wheel, without loading.  Poly-Cut™will not stain or corrode ferrous metals, nonferrous metals, plastics, ceramics, rubber or titanium.  This product is clean to work with and will not smoke, stain skin or clothing or cause dermatitis.

Available in:  55-Gallon Drums

Application:	Cutting Metals Over 30 Rc	Cutting Most Metals and Plastics	Grinding and Spray Mist
Dilution:	15:1	20:1	30:1
Refractometer Reading:	2.5	2.0	1.5

  Poly-Form™

Poly-Form™ is a water-soluble polymer lubricant for CNC turret and high-speed punch presses (stamping).  Our product has better viscosity than water-soluble oil and cools better than straight drawing oil so it works very well for blanking and forming operations.  Poly-Form™ is an excellent lubricant for soft nonferrous metals, such as aluminum, copper and brass, and will protect your nonferrous metals from oxidation, including galvanized and tin-plate.  This product is also clean to work with and will not smoke, stain skin or clothing or cause dermatitis.

Available in:  1-Gallon Jugs, 5-Gallon Pails and 55-Gallon Drums

Application	Precoating	Blanking and Forming	Drawing While Flooding Die	Punching
Dilution	1:1	4:1	4:1	10:1

Poly-Cut Defoamer™

Poly-Cut™Defoamer™ is sometimes needed when your machine uses a very high pressure nozzles.  If you find that you are having a foaming issue with your machining fluid, try adding our defoamer.